Framing at the Haidyn Residences in Missoula: walls sheathed in plywood and roof trusses against a blue sky

Science and technology

SkyPac constantly pursues proven and innovative ways to improve the built product.

Take a SkyPac wall apart.

The whole wall

Nine layers, each with a job. Gold marks every bead of sealant. Tap a number to build the wall.

From outside
In section, outside at left

Built to dry

Every wall gets wet eventually. SkyPac siding stands off the wall on a rainscreen, a vented gap of about 3/8 inch, the space building scientist Joseph Lstiburek argues for.1 Water drains down it, moving air dries the wall, and a dry wall combats mold and rot.

Sheathed in plywood

Our walls are sheathed in plywood, not OSB. Soaked, plywood rates 14 to 20 perms, a measure of how much vapor gets through; OSB stays near 3.2 In a side by side climate chamber test at the University of Waterloo, the OSB came out covered in mold and the plywood came out pristine.3

Plywood costs more. It is one of the first places we choose to spend.

Membranes that adapt

Inside, a smart vapor retarder holds moisture back in winter and opens as humidity climbs: one widely used membrane tests at 1 perm dry and 12 or more damp.2 Outside, the housewrap sheds water and lets vapor out; one common wrap tests at 58 perms.2

Tight by design

Air leaks carry moisture, dust and heat. Over a heating season in a cold climate, about a third of a quart of water diffuses through a sheet of drywall; a one inch square hole lets air carry about 30 quarts through it.4 So every window, seam and penetration is sealed before it is covered.

Few people will ever see that work. Every owner will feel it.

Fresh air on purpose

A tight home has to breathe by design. Controlled ventilation brings fresh air in and holds indoor humidity where the EPA advises, ideally 30 to 50 percent,5 which keeps the air clean and mitigates the risk of mold.

From the ground up

Concrete is thirsty: in theory, capillary action can pull water about six miles up through it.6 So a capillary break sits under every bottom plate, sealed above and below, and window sills slope outward from a back dam so water drains away from the framing.

SkyPac job dashboard sheets seen at an angle, one with the SkyPac logo in its header, with every figure masked

Technology

SkyPac couples sophisticated scheduling and review software with proprietary tracking systems.

Pictured: SkyPac’s own job dashboards.

Proprietary tracking

SkyPac tracks every job in a system designed in house: the budget by cost code, every change order and every draw, all tied to a single set of numbers. Invoices, the budget and the pay application are reconciled to the penny before a draw request goes out.

A timeline for every job

SkyPac builds each job’s schedule in dedicated scheduling software, with every trade and every duration on a single timeline.

Plans vetted sheet by sheet

Before ground breaks, SkyPac reviews every sheet of the plan set in dedicated review software, with a separate pass for water and the building enclosure. AI helps vet complex, dense plan sets, highlighting every possible discrepancy or error for further investigation. Conflicts go to the design team before they reach the field.

Budgets and draws, double checked

Specially designed AI workflows double check every budget and every draw package before it goes out. They serve as a failsafe: the judgment and the decisions stay with us.

Prices and lessons on file

SkyPac keeps a database of what suppliers and subcontractors actually charge and checks every new quote against it. After each phase, what the field learned is written into the checklist for the same phase of the next job.

See the work

Building science sources

  1. Is Rain-Screen Siding Worth the Effort?. Journal of Light Construction.
  2. Building Materials Property Table. Building Science Corporation, for the U.S. Department of Energy.
  3. BSI-061: Inward Drive, Outward Drying. Building Science Corporation.
  4. The Moisture Threat of Infiltration to the Building Envelope. Walls & Ceilings.
  5. Mold Course, Chapter 9. U.S. Environmental Protection Agency.
  6. Adding a Capillary Break to the Footing. Green Building Advisor.